Q: What is the difference between the KITERA LIFT+ and the KITERA LIFT+ Wood?
A: They are two different mechanical pencil constructions, not two finishes of one pencil. LI2500.05 has a hexagonal brass grip and an aluminium barrel, a lead grade window, a band-type clip, a guide pipe at the tip and a resin internal mechanism. LIWOOD.05 has a natural wood body, all-metal internals, a washer-type clip, no guide pipe and no grade window.
Q: Does the KITERA LIFT+ come in a lead size other than 0.5 mm?
A: No. KITERA publishes the LIFT+ mechanical pencils in 0.5 mm only. LI2500.05, LIWOOD.05 and the side-knock pencil are all 0.5 mm, which also means one lead refill size covers the pencil range.
Q: Where are KITERA LIFT+ products made?
A: KITERA lists LI2500.05 as made in Japan. LIWOOD.05 is marked Made in TAIWAN, and KITERA states that it is finished one at a time by skilled craftsmen at a long-established pen workshop in Taiwan. Country of origin is not published for every item in the line, so check the individual product page.
Q: Which refill does the KITERA LIFT+ side knock ballpoint pen take?
A: It takes a D1 size refill, the short metal-tube refill that is also sold as Zebra D1. D1 is a shared standard rather than a single-brand part, so replacements are easy to source. Both the 0.7 mm and the 0.5 mm side knock ballpoints use this format.
Q: Why does the LIFT+ LI2500.05 feel heavier toward the front?
A: The pencil is built around a low center of gravity. The hexagonal brass grip carries more mass than the aluminium upper barrel, and the complete pencil weighs about 27 g. Putting that weight forward of your fingers steadies the tip, which is why drafting pencils are built this way.
Q: How do I tell the side-knock model from the standard LIFT+ mechanical pencil?
A: The side-knock version advances lead with a button on the side of the barrel near the clip instead of a knock at the rear end. KITERA has not published a model number for that version, so the side button and the 0.5 mm marking are the identifiers rather than a printed code.
Q: Will two LIFT+ Wood pencils look the same?
A: No, and that is intentional. KITERA notes that because the body is natural wood, both the grain pattern and the grip thickness vary from one pencil to the next, and the colour deepens as the wood is handled. Zebrawood shows pronounced stripes, while walnut is darker and more even.
Q: Is the KITERA LIFT+ the same as the KITERA KS-01 mechanical pencil?
A: No. KS-01 appears in retailer listings as a separate KITERA mechanical pencil, and it is not listed on KITERA's own LIFT+ page. The LIFT+ pencils are identified by LI2500.05 for the metal version and LIWOOD.05 for the wood version, so those numbers are the quickest way to tell which series a listing belongs to.