KITERA LIFT+ Side Knock Ballpoint Pen 0.7 mm
The LIFT+ ballpoint takes the joint from Kitera's mechanical pencil and puts a 0.7 mm ballpoint behind it. Press the middle of the body and the refill extends; release and the point retracts. The clip and the joint are the same piece, so there is nothing to push at the top of the pen and nothing to twist at the tip.
It uses a D1 refill, the short international format also used by Zebra's D1-compatible pens. That matters for a pen at this level: the body is the part you keep, and a D1 refill is the one thing you can replace rather than the whole pen.
- Model: KSK-BP-BK
- Refill: D1 format, 0.7 mm black
- Finish: matte black metal
- Mechanism: side knock at the middle joint
- Made in Japan
What 0.7 mm is for
0.7 mm lays down a line that stays legible at speed, which is why it is the usual choice for notes, forms and anything written standing up. On thin paper it can strike through more than a 0.5 mm, so it is a note-taking point rather than a fine-line point.
The clip and the knock are one part
On most pens the clip is decoration. Here it is the lever: the top of the pen has no button because the mechanism lives at the joint under the clip. That also means the pen does not need a cap, so there is one less piece to lose in a bag.
Frequently Asked Questions
Q: What refill does it use?
A: A D1-format refill in 0.7 mm black, the short international refill size.
Q: How does it open and close?
A: Press the middle joint to extend the refill and release to retract it. There is no cap and no top knock.
Q: What is the body made of?
A: Metal with a matte black finish, made in Japan.
Q: Is 0.7 mm too thick for everyday writing?
A: No. 0.7 mm is a standard note-taking point; it lays a darker line than 0.5 mm and can strike through thin paper faster.
Q: Does it come with a refill?
A: Yes, it ships with a black 0.7 mm D1 refill fitted.
More pens and pencils, plus journaling supplies and kawaii stationery.
More from the LIFT+ line
Other Kitera LIFT+ writing tools: all pens and pencils