The KITERA LIFT+ series is easier to understand on how it is built, because two pencils with almost the same outline share very little underneath. What follows is a model-by-model account of the five LIFT+ items sold here, using KITERA's own specifications.
What the LIFT+ line actually is
KITERA belongs to Kitera Shouji, a stationery trading house in Osaka founded in 1912. It is not a pen factory: for over a century it has supplied Japanese stationery shops, bookshops and general stores with products from more than 300 manufacturers, which is why its people judge pens by weight, balance and how a finish survives a year of use. LIFT+ is the line that came out of that habit, and each version answers a different way of writing. Searches for KITERA also return unrelated companies, so the reliable anchors are LIFT+ and the model numbers beginning with LI.
The five items in this collection
Three are pencils and two are ballpoints, but the useful split is different: two pencils sharing a silhouette and almost nothing else, one built around a different advance mechanism, and two ballpoints differing only in line width.
| Version | Model number | Advance mechanism | Line width |
|---|---|---|---|
| KITERA LIFT+ Mechanical Pencil 0.5 mm | LI2500.05-BK, LI2500.05-WH | Rear knock | 0.5 mm lead |
| KITERA LIFT+ Wood Mechanical Pencil 0.5 mm | LIWOOD.05-ZW (zebrawood), LIWOOD.05-WA (walnut) | Rear knock | 0.5 mm lead |
| KITERA LIFT+ Side Knock Mechanical Pencil 0.5 mm | Not published by KITERA | Side knock | 0.5 mm lead |
| KITERA LIFT+ Side Knock Ballpoint Pen 0.7 mm | KSK-BP-BK | Side knock | 0.7 mm |
| KITERA LIFT+ Side Knock Ballpoint Pen 0.5 mm | KSK-BP-BK05 | Side knock | 0.5 mm |
LI2500.05: the low-center-of-gravity pencil
This is the model the series is known for: about 144 mm long and 10 mm across, about 27 g, made in Japan. The lower section is a hexagonal brass grip, the upper barrel is aluminium, with iron and ABS parts completing the assembly. The clip is a band type that slides over the barrel, a small window shows which lead grade is loaded, and the tip carries a guide pipe — the short sleeve that supports lead right where it leaves the pencil.
The brass grip is the point of the design. Mass forward of your fingers lets the pencil rest on the paper instead of hovering, so the lead meets the surface at steadier pressure. That shows in long hatching, lines drawn against an edge, and handwriting small enough that a wobbling tip becomes a correction. The hexagonal section gives a flat face for your thumb, which is why drafting pencils keep a shape a round barrel would improve on for looks alone.
One detail is worth knowing first: KITERA lists the internal mechanism as resin, even though everything visible is brass and aluminium. That explains why the pencil sits lighter than its finish suggests, and it is the clearest technical difference from the wood version.
LIWOOD.05: zebrawood and walnut, finished in Taiwan
The wood version keeps the LIFT+ outline and changes the material logic. About 142 mm long and 10 mm across, about 24 g — marginally shorter and noticeably lighter than the metal model. The whole barrel, the hexagonal-plus-round profile that defines the series, is cut in solid wood, offered in striped zebrawood and in darker walnut. KITERA marks it Made in TAIWAN and states on its own site that the pencils are finished one at a time by skilled craftsmen at a long-established pen workshop in Taiwan.
In one respect it is the more mechanically serious of the two: KITERA specifies a full-metal mechanism, matched to the wood body, where the metal-bodied pencil uses resin. The trade-off comes at the tip. There is no guide pipe, so lead is supported less closely, and no lead grade window either. The logo is laser engraved rather than printed, and the clip is a washer type that threads on.
Two things follow from working in natural wood. KITERA notes that grain and grip thickness vary between individual pencils, and that colour deepens with handling, so a pair bought together will not stay identical. Keep it dry; it darkens rather than wears through.
The two pencils, side by side
KITERA publishes a six-point comparison on the LIFT+ Wood page, the most direct statement of how far apart the two are.
| Feature | LI2500.05 | LIWOOD.05 |
|---|---|---|
| Lead grade window | Yes | None |
| Clip | Band type | Washer type |
| Logo | Printed | Laser engraved |
| Body material | Brass and aluminium | Natural wood |
| Internal mechanism | Resin | Full metal |
| Tip | Guide pipe | No guide pipe |
Read it in order of consequence: the mechanism and tip rows change how the pencil behaves on paper; the window, clip and logo rows change only how it lives on a desk. Both are 0.5 mm and rear-knock, so the decision is about material and mechanism, not lead size.
The side-knock pencil and the two ballpoints
These three share one idea: advance lead or ink from a button at the side of the barrel, just below the clip, instead of reaching for the rear. It matters where a rear knock is awkward — notes taken while standing, or a checklist held in the other hand.
The pencil carries 0.5 mm lead and has no model number published by KITERA; the side button and the 0.5 mm marking identify it. The ballpoints split by line width: 0.7 mm for fast signatures and notes read at arm's length, 0.5 mm for forms, small handwriting and margin notes. Both are black and both take a D1 size refill, the short metal-tube standard also sold as Zebra D1, so refills are a shared purchase.
How to choose
On a drawing board or beside a straightedge, LI2500.05 is the version the series was designed around: brass grip, guide pipe and grade window are all drafting features, and the weight does useful work rather than merely feeling substantial.
In a notebook, diary or letter, LIWOOD.05 makes more sense: lighter, warmer in the hand, and the more interesting object of the two, while the full-metal mechanism answers the objection that a wooden pencil is decorative. What you give up is the guide pipe, which matters if you press hard.
If speed decides rather than precision, the side-knock group is the practical answer.
Lead, refills and care
All three pencils take standard 0.5 mm lead — HB for everyday work, 2B for a darker line with less pressure. The grade window on LI2500.05 helps if you rotate grades; LIWOOD.05 has none, so keep one grade per pencil. Both ballpoints take the D1 refill and nothing else.
Owners of the painted LI2500.05 report the finish marks if it shares a pocket with keys, so a case is reasonable rather than fussy. The wood version resists scuffing but responds to moisture. Neither needs oil: the mechanisms are sealed assemblies, and the useful maintenance is keeping grit out of the tip.
Where to start
All five are grouped in the KITERA LIFT+ collection, where each page lists the colours available. For the version most people picture when they hear LIFT+, start with the metal model; for the one that shows what the series can do, start with the wood.