Kuretake ZIG 2 Way Glue Pen 1mm ball tip squeeze and roll pen

Kuretake ZIG 2 Way Glue Pen - Dual Action Permanent and Repositionable Adhesive

1mm Ball Tip
$5.00
Sale price  $5.00 Regular price 
Skip to product information
Kuretake ZIG 2 Way Glue Pen 1mm ball tip squeeze and roll pen

Kuretake ZIG 2 Way Glue Pen - Dual Action Permanent and Repositionable Adhesive

$5.00
Sale price  $5.00 Regular price 
Tip

The Kuretake ZIG 2 Way Glue Pen is the adhesive pen that Japanese paper crafters reach for because one nib gives two different bonds. The glue leaves the tip blue and wet, and in that state it is a permanent adhesive. Wait a moment, let the blue turn clear, and the very same layer becomes a temporary, repositionable tack. That single trick replaces a glue stick, a tape runner and a removable adhesive in one slim pen that fits in a pencil case.

Four tip sizes for four jobs

The range is built around tip width rather than colour: a 1mm ball tip for pinpoint dots and die-cut corners, a 2mm fine tip for narrow lines and small lettering, a 4mm chisel tip that lays a flat controllable stripe, and a 15mm broad tip that covers envelopes and large panels quickly. The 15mm pen holds 25g of adhesive, so a wide background does not empty the barrel in one sitting. Every tip is a self-sealing marker nib, which means no dripping, no stringing and no glue blobs on the desk.

Wet bond, dry bond

For a bond that stays put, apply generously and press the surfaces together while the glue is still blue. For a bond you may want to undo, apply a thin layer and let it dry clear first: the film stays slightly tacky, so photos, die-cuts and masks can be lifted off and moved. This is the same behaviour that makes the pen useful for masking fluid effects: paint over the dried glue, then rub it away to reveal clean paper underneath.

Made for paper, safe for photos

The adhesive is acid-free and xylene-free, carries the ACMI AP seal and is marketed as photo-safe, so scrapbook pages, journaling spreads, handmade cards and envelopes will not yellow or bleed over time. It dries clear and stays flat, which keeps thin notebook paper and washi from cockling the way liquid glues do.

Where it earns its place in a journaling kit

Draw a line, wait for it to clear, and press glitter, foil flakes or embossing powder into it: the nib keeps the sparkle inside the line instead of across the page. The same tack holds stencils while you ink over them, keeps small die-cut pieces in place while you compose a spread, and turns any page into a reusable sticky mat for tiny paper scraps. Because the bond is reversible, nothing you lay down on a journal page is permanent until you decide it is.

Living with the pen

Keep the cap on between strokes so the nib does not dry out, and store the pen tip up if you plan to leave it for weeks. The 4mm chisel and 15mm broad pens are about 5.6 inch and 5 inch long respectively, so both sit comfortably in a standard pen loop. If a nib ever clogs, wipe it on scrap paper rather than picking at it, and the self-sealing valve will do the rest.

Pair the glue pen with a water brush or a real brush pen for mixed-media spreads, or browse the Kuretake collection and our art supplies for the rest of the ZIG line. For journaling companions see the journaling collection, the ZIG Clean Color Real Brush single pens and the Fudebiyori Metallic brush pens, and read our guide to Kuretake Gansai Tambi and brush pens before your next spread.

Frequently Asked Questions

Q: What is the Kuretake ZIG 2 Way Glue Pen?
A: It is a dual action adhesive pen from Kuretake's ZIG Memory System. The glue is blue and wet when it leaves the tip, which gives a permanent bond; leave it to dry until it turns clear and the same layer becomes a repositionable, temporary adhesive. One pen therefore covers both permanent and removable work.

Q: Which tip size should I choose?
A: The 1mm ball tip is the finest and is made for pinpoint dots, die-cut corners and small lettering. The 2mm fine tip suits narrow lines and tiny embellishments. The 4mm chisel tip gives a flat, controllable stripe for foiling, masking and tape runs. The 15mm broad tip covers the widest area and is the one to use for envelopes, large glitter panels and full-page backgrounds.

Q: How do I get a permanent bond?
A: Apply a generous layer and stick the two surfaces together while the glue is still blue and wet. The wet film forms a strong permanent bond, so work quickly on the part you want fixed for good.

Q: How do I get a temporary, repositionable bond?
A: Apply a thin layer and let it dry until the blue colour disappears. The dried film stays slightly tacky, so paper, photos and die-cuts can be lifted and re-positioned, which is useful for masking, stencilling, and holding small pieces while you work.

Q: Is the glue safe for paper crafts and photos?
A: Yes. The adhesive is acid-free and xylene-free, it carries the ACMI AP seal and is photo-safe, so it will not yellow or eat into photos, scrapbook pages, journaling spreads or handmade cards. It dries clear without cockling thin paper.

Q: Can I use it for glitter, foil and embossing?
A: That is one of its main uses. Draw or stamp a glue line, wait for it to turn clear for a tacky surface, then press glitter, foil flakes or embossing powder into it. Because the nib lays down a controlled line you can keep the glitter exactly where you want it instead of covering the whole page.

You may also like